Before & After
Click on a photo to enlarge.
Michelle is one of original customers of Omni Basement Systems. Her house is on a property that the backyard slopes toward the wall and it is causing it to bow,
Omni stabilizied the block foundation wall by adding Carbon Armor. Carbon Armor is 7" wide strips of Carbon Fiber that is adhered tot eh wall by epoxy. THe top of the all is also achored tot he rim joist using AmorLocks.
Jonathan has a home in Hamilton that needed some waterproofing. Omni Basement Systems installed a patented drainage system called Waterguard. Waterguard takes water from the walls and under the floor and drains it to a the Supersump sump pump system. A wall membrane is added to the walls as a vapor barrier to make sure all the water gets into the Waterguard.
Bradley has a century plus home in Hamilton that needed some floor support. Omni Basement Systems installed the SmartJack system that includes a large concrete footing and a supplemental beam. The SmartJack and the Supplemental Beam are fully galvanized so they won't rust.
Matt has an old house in Hamilton. This house probably started as a just a crawlspace style and since it has had the basement lowered. This gives challenges to doing waterproofing. An interior waterproofing job is the only solution in this case. Omni Basement Systems, along with a P. Engineer designed a system that would waterproof this style of foundation.
our Cleanspace wall membrane went on the wall and where there is a bench footing from the basement being lowered, Delta drainage membrane went over the footing to allow water to drain past into the WaterGuard interior drainage system.
Matt also needed support for his sagging floors so Omni Basement systems installed a fully galvanized supplemental beam and SmartJacks to support it.
Matt in Hamilton had a crawlspace in Hamilton, On that needed a lot of help. As is with all crawlspaces, it needed encapsulation which is a vapor barrier over the ground to protect the house from the earth's moisture. The floors were already sagging because of the poor supports that it was sitting on. Omni Basement Systems went to work,. First cleaning the debris out and leveling the ground in order to install the Cleanspace vapor barrier. The next step was to install supplemental beams under the joist system and support them with our fully galvanized and adjustable Smartjacks system. these SmartJacks are designed to hold up to 30.000lbs. and will never rust.
